The Gauge Shop - Your Source for Gauge Sales & Service

Series CS

Features

Highest measurement accuracy in its class. X axis: +/- (1+0.01L) um Z1 axis: +/- (1.5+|2H|/100) um

To detect surface roughness and contour in a single measurement the Z1-axis detector unit of CS-3200S4 has a wide measuring range and high resolution of 5mm / 0.08um to 0.05mm / 0.0008um.

In order to maintain the traverse linearity specification for an extended period of time, Mitutoyo has adopted highly rigid ceramic guides that combine the characteristics of smallest secular change and remarkable resistance to abrasion.

Drastically increased drive speed further reduces total measurement time. X axis: 80mm/s, Z2 axis: 20mm/s

To enhance safety during fast traverse, the Z-axis detector unit incorporates a safety device (Automatic Stop-On-Collision Mechanism).

The detector unit can be extended to avoid interference between the drive unit and work piece. The measuring range is shifted to the left by 2.76" (70mm).

Incorporation of an ABS scale in the Z2 axis eliminates the need for origin point re-setting conventionally required for every step of repeated measurements over step or multiple sections.

Small holes and inclined planes can be efficiently measured using the inclined X-axis drive unit and fine-feed handles on the X and Z2 axes.

All detector and drive unit cables are housed inside the main unit to eliminate any risk of abrasion and guarantee trouble free, high-speed operation.

Orientation of the drive unit can be inclined by +/- 45 degrees. This allows CS-3200 to measure an inclined surface quickly.

*PC stand not included

Specifications

Model No.	CS-3200S4
Order No.	525-411A
X1-axis measuring range	4in(100mm)
Z2-axis vertical travel	12in(300mm)
Technical Data	Contour Measurement X1-axis Measuring range: 4"(100mm) Resolution: 1.97uin(0.05um) Measurement method: Reflective-type linear encoder Drivespeed: 0-3.1"/s (0-80mm/s) and manual Measuring speed: 0.00078-0.00787"/s (0.02-0.2mm/s) (surface roughness) 0.00078-0.0787"/s (0.02-2mm/s) (contour) Measuring direction: (Push/Pull) Traverse linearity: 8uin/4"(16uin/4") [0.2um/100mm(0.4um/100mm)] ( ):at the protruded detector position * with theX axis in horizontal orientation Linear displacement accuracy (at20 degrees C): +/- (32+10L)uin { +/- (0.8+0.01L)um} * L =Drivelength(mm) Inclination range: +/- 45 degrees Z2-axis (column) Vertical travel: 12"(300mm) Resolution: 39.4uin(1um) Measurementmethod: ABSOLUTE linear encoder Drivespeed: 0-0.78"/s (0-20mm/s)and manual Z1-axis(detector unit) Measuringrange/resolution: 3uin/.2",.3uin/.02", .03uin/.002" (0.08um/5mm,0.008um/0.5mm,0.0008um/0.05mm) Measurementmethod:Differentialinductance method Lineardisplacement: +/- (60+20H)uin+/- (1.5+2H/100)um Accuracy(at20 degrees C) *H: Measurement height from the horizontal position (mm) Stylus up/down operation:Arc movement Face of stylus: Downward Measuringforce: 0.75mN T raceableangle: Ascent:65 degrees,descent: 65 degrees (using the standard stylus provided and depending on the surface roughness) Stylus tip Radius:2um,diamond Basesize (WxH): 23.6 x 17.7"(600x450mm) Base material: Granite Mass: 309lbs(140kg) (main unit) Powersupply: 100 - 240VAC +/- 10%,50/60Hz Power consumption: 400W (mainunit only)