 |
  |
|
|
||
 |
||
Surfcom 3000A
Integrated Surface Texture & Contour Measuring Instrument
World's Highest Performance
The SURFCOM 3000A is an integrated surface texture and contour measuring instrument that sets a new paradigm for precision and performance. Resolution is 0.005 µm and the ratio of dynamic range to revolution is 2,400,000 : 1.
Analysis of Surface Texture/Profile in One
The 3000A is provided with TSK's TIMS integrated measuring system featuring high flexibility and expandability. This enables extremely efficient analysis of surface texture and contour profile in only one trace operation.
Easy to Operate
A variety of measuring assist functions are incorporated, including an AI function, trace display function, repeat function and auto calculation range expansion function. This makes the unit easy to operate even for beginners.
Highly Stable Double-Beam Path-Type Laser Interference Sensor
Our optical-fiber based laser interference measuring system has been applied to develop a highly stable double-beam path-type laser interference sensor with 0.005 µm resolution and a ratio of dynamic range to revolution of 2,400,000 : 1. This revolutionary system enables one-trace evaluation of contour profile and the minute hidden surface profile.
Wide Range: Automatic Measurement
The 3000A has a wide range of 200 mm in the horizontal direction and 12 mm in the vertical direction. It has a motor-driven tilting unit that can tilt 45°, and teaching/ playback function that enables automation of everything from measurement to printout.
AI Function
Line, circle or other element can be automatically
determined by simply specifying the profile analysis range. This is a representation of our commitment to making
measurements as easy as possible.
Measurement: Simply Set Measuring Length
The trace input method where the measuring range is specified after a manual trace is effective for precise micro-profile positioning. This also reflects our commitment to making measurements as easy as possible. The conventional method of setting the measuring distance from
the starting point can also be used.
Analysis
- Dimension Line Display: The diameter, angle, pitch and other actual measured values can be entered onto the dimension lines on the measured result diagram. In addition, geometric deviation of roundness, straightness and other values, and surface texture can also be displayed.
- Calculation Result/Design Value Collation Function: This function enables one-glance OK/NG judgment for tolerance collation. The operator does not have to make a pass/fail judgment.
- External Output Function: Measured results can be output as a CSV file. This CSV file can be read by a standard spreadsheet program.
- Profile Evaluation: Best Fit Function In order to minimize the error between the differences in the standard settings for the design values and measured values to be compared, the coordinate system with the minimum error between the design/measured values is obtained, and error collation is performed for the profile data at each point.
Printout
The results of surface texture and contour profile analysis are output on a single inspection report.
"Your Tennessee Source for Gauge Sales and Service"
P.O. Box 212
1432 East Lee Hwy
Suite 3
Loudon, TN 37774
Phone: 865-458-9223
Fax: 865-458-3743
sales@gaugeshop.com
This site designed and maintained by AIMS Computer Systems
