"From Calipers to Vision Systems, The Gauge Shop is Your One Stop Shop."

 


Rondcom 40C/30C
Compact Desktop Roundness Measuring Instruments with Superior Cost Performance and Analysis Functions of a High Class Machine


Highly Rigid Static-Pressure Air Bearings
Static-pressure air bearings with a proven track record have been adopted for the rotation mechanism, providing the highest load resistance and extended rotation precision in this class of machine.

Operator-Friendly Centering/Tilting Support Function
Eccentricity in the X and Y directions of the center of the workpiece axis with respect to the center of the rotating axis, as well as tilting are displayed in bar graphs on the LCD panel. This simplifies alignment.

Automatic Measuring Function
Each axis is provided with a motorized auto stop function, automating movement, measurement and retract operations. This function is extremely effective for repeated measurements of mass produced workpieces on the production floor.

Automatic Magnification Calibration Function
This function simplifies calibration of magnification when the stylus is changed to accommodate different workpieces profiles. The sensitivity for four types of detectors can be registered.

Automatic Eccentricity Correction/Tilt Correction Function
Analyzing the eccentricity and tilting of the workpiece in the measuring range and automatically correcting for it have dramatically reduced the time and effort needed to perform alignment.

Combination of Center Line Definition Methods
Four types of center line definition methods can be freely selected and combined for concentricity, squareness and other measuring items.

Standard High Speed Graphic Printer
A high speed graphic printer that uses recording paper with a recording width of 104mm immediately provides a high-resolution record of measurement. Since various measuring conditions and parameter results are recorded at the same time, it can be used as a data sheet.

Standard IC Card Unit
The provision of an IC card unit enable all measuring condition settings and measured data to be stored. Special programs that are provided in response to customer requests can be loaded using the IC card unit.

 

 

 





"Your Tennessee Source for Gauge Sales and Service"

P.O. Box 212
1432 East Lee Hwy
Suite 3
Loudon, TN 37774
Phone: 865-458-9223
Fax: 865-458-3743
sales@gaugeshop.com




Copyright © 1998 - 2004 The Gauge Shop. All Rights Reserved. Direct inquiries to sales@gaugeshop.com
This site designed and maintained by AIMS Computer Systems