Contourecord 2600E

High Precision Contour Measurement 1µ or Less in Z Direction (for displacement of 5mm)

Auto Element Judgment (AI Function)
The 2600E automatically determines the type of element (point-line-circle).

Dimension Display Function
The actual measured values for parameters and geometric deviation can be displayed on the diagram.

Profile Synthesis Function
The limitations on the analysis range due to the angle of the stylus are addressed with the synthesis function.

Peak and Valley Function
This function enables the maximum workpiece point to be detected by tracing with the stylus, simplifying alignment.

Calculation Point Repeat Function
Overall workpiece analysis can be executed after completing only one pattern analysis for workpieces where certain shapes are repeated.

High Precision Contour Profile Evaluation
The 2600E is ideal for the evaluation of non-spherical lenses, optical fiber connectors, ball screws and other parts where high profile accuracy is required.

Host of Contour Evaluation Functions
A wide range of evaluation are provided. Standard functions include a measured data (point data)/design value deviation collation function, design value generation function, best fit function and IGES/DXF conversion function to facilitate communication with CAD systems.

"Your Tennessee Source for Gauge Sales and Service"
P.O. Box 212
1432 East Lee Hwy
Suite 3
Loudon, TN 37774
Phone: 865-458-9223
Fax: 865-458-3743
sales@gaugeshop.com